15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/05/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 0.803(20.40) 0.386(9.8) 0.240(6.10) 0.020(0.50) 0.100(2.54) 0.300(7.62) 0.126(3.20) 0.300(7.62) 0.100(2.54) 0.600(15.24) ? 0.8 allied da tec ode AHTA-1610S -xt 01 7 -dt rd+ 1 rd- 3 ct 4 td+ 5 16 rx+ 14 rx- 13 ct 12 tx+ all specifications subject to change without notice. mechanical 10/100 base t single port transformer AHTA-1610S cw/w: 50pf typ @ 100khz, 0.2v polarity: 1-16, 5-12, in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-1610S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -16 60-80mhz -12 50mhz -14.5 part number AHTA-1610S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) 60s -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -35 0.3-30mhz -42 60mhz isolation ?
|